Keyboard storage gets awkward once a collection grows. Drawers make boards harder to reach; laying them flat consumes desk space. Breathmeet’s Octagon Keyboard & Headphone Stand holds three upright. After about three weeks, I’ve found it stable even with my heaviest board at the top, and the vertical arrangement feels much less intrusive. The main caveat is material: its appearance suggests more solid wood than you actually get. Buy for the storage performance, and it’s satisfying. Expect an all-solid-wood object, and the first impression may be different.
Exterior and Design
Unboxing is a breeze since it comes fully assembled with just a tag attached. The main body consists of two dark matte black panels standing side by side, held together by two solid wood rods running through them.
The color of the panels is uniform all the way to the cut edges, meaning you won’t see any interrupted coating when looking from the side. The hooks supporting the keyboards are carved directly into the L-shape of the panels, requiring no separate attached parts.
The base is an octagonal-cut walnut veneer into which the panels are inserted. Not a single metal component is used in the construction.
Depending on the lighting, the panels can look like a dark gray in photos, but to the naked eye, they are very close to black. The diagonally dropping silhouette definitely lives up to the “Octagon” name.
Key Features
According to the specifications, the total height is 470mm, and the top width is 100mm. The octagonal base measures 200x200mm, featuring a 3-tier slot system where each slot is 175mm deep. Since the slot width wasn’t officially stated, I measured it myself at around 50mm. The materials used are hardwood, walnut, and color boards. The black panels taking up most of the surface area are color boards, while the solid wood is used for the base and rods. There is a notch carved into the back for hanging headphones.
The Octagon lineup is divided into this keyboard version and a joystick version. Color options are not explicitly listed on the sales page. This is a completely separate product with a different structure from Breathmeet’s previous 3P and 4P stands. It is made to order in Korea. Weight and maximum load capacity have not been disclosed.
Zero Wobble Even When Loaded with Three Keyboards
Putting a full-aluminum keyboard only on the top tier seemed like an obvious way to test my confidence in the stand. I expected the high center of gravity to make it lean forward when nudged. In my arrangement, however, even pushing it didn’t produce a worrying sense of movement. The broad octagonal base and the angle of the boards appear to keep the load inside the footprint. I got the same result on a desk mat and on the bare top. Another useful detail in daily use is being able to take out the middle board without interfering with the one above it. This remains an observation about my own combination of keyboards, not a published load rating. With no official maximum or slot-width specification, I would keep that limit to the conclusion in mind.
Feels Like It Takes Up Less Desk Space Than Flat Old Models
The older model of the Octagon Keyboard Stand ↑
Breathmeet’s previous 3P and 4P stands featured a layout where keyboards were laid down almost flat. While those technically occupied a similar footprint on paper, they felt like they ate up a lot of front-to-back desk depth. The new Octagon, by contrast, keeps three units standing almost completely upright. I slid it right into the dead space next to my monitor, and it didn’t restrict my speaker clearance at all.
Additionally, the new version has a groove carved into the rear frame to accommodate headphones. On the flip side, its visual presence on your desk definitely increases. Placed in front of a shelf piled with keycap boxes, it actually makes everything look much tidier.
The Black Panels Are Color Board, Not Solid Wood
The walnut base looks well matched to the dark panels, and the angled cut edges are cleanly finished. The difference becomes more apparent when I handle the stand while changing keyboards. The large panels feel like board material, and their uniform coloring continues across the cut edges. They are color board, rather than the natural solid wood I might have imagined from the overall appearance. The base and the pair of rods supply the actual wood elements. Most of the visible area is therefore a different material. That is why I would separate the stand’s very good storage performance from expectations of an entirely wooden furniture piece. Someone buying for 100% solid wood could feel the same initial disappointment even while liking the finished shape.
Pros and Cons
Pros
- Highly stable even when fully loaded with a heavy keyboard on the top tier
- Vertical storage design consumes virtually zero desk depth
- Built entirely with panels and wood rods without metal, keeping joints seamless and hidden
Cons
- Most of the surface area is color board, which might disappoint those expecting a 100% solid wood product
- Slot width (5cm) and maximum load capacity are not disclosed, so thicker custom builds should be measured before purchasing
For Keyboard Collectors
A stand needs to give back usable space, and this one has done that in my setup. I bought it to organize the keyboards, but the result is tidy enough that I find myself looking at the arrangement again simply because I like it. That satisfaction matters alongside the practical business of storing and removing the boards. Unless a 100% solid-wood construction is essential, I would recommend it on that basis. The alternatives haven’t appealed to me as much: some acrylic stands lack the appearance I want, while metal supports leave me worrying about scratches. This arrangement answers those concerns while keeping the collection accessible. Its material mix deserves a clear explanation, but it hasn’t prevented me from being happy with the way the stand works.
